TI TPS5430DDAR
| Manufacturer | |
| MPN | TPS5430DDAR |
| LCSC Part # | C9864 |
| Packaging | SOIC-8-EP |
| Customer # | |
| Key Attributes | 3-A, Wide Input Range, Step-Down Converter |
| Datasheet | TI TPS5430DDAR |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 10 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators | |
| Manufacturer | TI | |
| Packaging | SOIC-8-EP | |
| Operating Temperature | -40℃~+125℃@(TJ) | |
| Frequency - Switching | 500kHz | |
| Function | Step-down type | |
| Number of Outputs | 1 | |
| Features | Cycle-by-cycle current limiting;Hiccup current limiting;Overcurrent Protection | |
| Output Type | Adjustable | |
| Topology | Buck | |
| Operating Voltage | 5.5V~36V | |
| Switch tube (built-in/external) | Built-in | |
| Output Voltage | 1.221V~32.04V | |
| Output Current | 3A | |
| Quiescent Current | 4.4mA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators | |
| Manufacturer | TI | |
| Packaging | SOIC-8-EP | |
| Operating Temperature | -40℃~+125℃@(TJ) | |
| Frequency - Switching | 500kHz | |
| Function | Step-down type | |
| Number of Outputs | 1 | |
| Features | Cycle-by-cycle current limiting;Hiccup current limiting;Overcurrent Protection |
| Type | Description | |
|---|---|---|
| Output Type | Adjustable | |
| Topology | Buck | |
| Operating Voltage | 5.5V~36V | |
| Switch tube (built-in/external) | Built-in | |
| Output Voltage | 1.221V~32.04V | |
| Output Current | 3A | |
| Quiescent Current | 4.4mA |
Introduction
The TPS543x is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltagelockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feedforward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, over-voltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS543x feedback loop is internally compensated. The TPS5431 is intended to operate from power rails up to 23 V. The TPS5430 regulates a wide variety of power sources including 24 V bus. The TPS543x device is available in a thermally enhanced, easy to use 8-pin SOIC PowerPAD package. TI provides evaluation modules and the Designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
Features
- Wide Input Voltage Range:
- TPS5430: 5.5 V to 36 V
- TPS5431: 5.5 V to 23 V
- Up to 3-A Continuous (4-A Peak) Output Current
- High Efficiency up to 95% Enabled by 110 mΩ Integrated MOSFET Switch
- Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
- Internal Compensation Minimizes External Parts Count
- Fixed 500 kHz Switching Frequency for Small Filter Size
- Improved Line Regulation and Transient Response by Input Voltage Feed Forward
- System Protected by Overcurrent Limiting, Overvoltage Protection and Thermal Shutdown
- -40°C to 125°C Operating Junction Temperature Range
- Available in Small Thermally Enhanced 8-Pin SO PowerPAD Package
Applications
- Consumer: Set-top Box, DVD, LCD Displays
- Industrial and Car Audio Power Supplies
- Battery Chargers, High Power LED Supply
- 12-V/24-V Distributed Power Systems
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 0.8067 | $ 0.81 |
| 10+ | $ 0.6772 | $ 6.77 |
| 30+ | $ 0.5854 | $ 17.56 |
| 100+ | $ 0.51 | $ 51.00 |
| 500+ | $ 0.4854 | $ 242.70 |
| 1,000+ | $ 0.4706 | $ 470.60 |
Standard Packaging2500/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators | |
| Manufacturer | TI | |
| Packaging | SOIC-8-EP | |
| Operating Temperature | -40℃~+125℃@(TJ) | |
| Frequency - Switching | 500kHz | |
| Function | Step-down type | |
| Number of Outputs | 1 | |
| Features | Cycle-by-cycle current limiting;Hiccup current limiting;Overcurrent Protection | |
| Output Type | Adjustable | |
| Topology | Buck | |
| Operating Voltage | 5.5V~36V | |
| Switch tube (built-in/external) | Built-in | |
| Output Voltage | 1.221V~32.04V | |
| Output Current | 3A | |
| Quiescent Current | 4.4mA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators | |
| Manufacturer | TI | |
| Packaging | SOIC-8-EP | |
| Operating Temperature | -40℃~+125℃@(TJ) | |
| Frequency - Switching | 500kHz | |
| Function | Step-down type | |
| Number of Outputs | 1 | |
| Features | Cycle-by-cycle current limiting;Hiccup current limiting;Overcurrent Protection |
| Type | Description | |
|---|---|---|
| Output Type | Adjustable | |
| Topology | Buck | |
| Operating Voltage | 5.5V~36V | |
| Switch tube (built-in/external) | Built-in | |
| Output Voltage | 1.221V~32.04V | |
| Output Current | 3A | |
| Quiescent Current | 4.4mA |
Introduction
The TPS543x is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltagelockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feedforward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, over-voltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS543x feedback loop is internally compensated. The TPS5431 is intended to operate from power rails up to 23 V. The TPS5430 regulates a wide variety of power sources including 24 V bus. The TPS543x device is available in a thermally enhanced, easy to use 8-pin SOIC PowerPAD package. TI provides evaluation modules and the Designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
Features
- Wide Input Voltage Range:
- TPS5430: 5.5 V to 36 V
- TPS5431: 5.5 V to 23 V
- Up to 3-A Continuous (4-A Peak) Output Current
- High Efficiency up to 95% Enabled by 110 mΩ Integrated MOSFET Switch
- Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
- Internal Compensation Minimizes External Parts Count
- Fixed 500 kHz Switching Frequency for Small Filter Size
- Improved Line Regulation and Transient Response by Input Voltage Feed Forward
- System Protected by Overcurrent Limiting, Overvoltage Protection and Thermal Shutdown
- -40°C to 125°C Operating Junction Temperature Range
- Available in Small Thermally Enhanced 8-Pin SO PowerPAD Package
Applications
- Consumer: Set-top Box, DVD, LCD Displays
- Industrial and Car Audio Power Supplies
- Battery Chargers, High Power LED Supply
- 12-V/24-V Distributed Power Systems
C9864 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| TPS5430DDA | TI | ESOP-8 | 4,078 | $ 0.9525 | ||
| TPS5430QDDARQ1 | TI | SOP-8-EP | 531 | $ 2.3665 | ||
| TPS5450QDDARQ1 | TI | SOIC-8-EP | 2,430 | $ 3.6827 | ||
| TPS5450DDAR | TI | SOP-8-EP-150mil | 10,164 | $ 1.9382 | ||
| RT8279GSP | RICHTEK | SOP-8-EP-150mil | 31,074 | $ 0.6817 | ||
| RT8289GSP | RICHTEK | SOIC-8-EP | 23,276 | $ 0.8113 | ||
| LM22676MRX-ADJ/NOPB | TI | SOIC-8-EP | 2,508 | $ 1.6378 | ||
| LM22676MRE-ADJ/NOPB | TI | SOIC-8-EP | 816 | $ 1.879 | ||
| LM22670MRX-ADJ/NOPB | TI | SOIC-8-EP | 80 | $ 2.8715 | ||
| RT2808AGSP | RICHTEK | SOP-8-EP | 0 | $ 3.7332 |
Product FAQ
- 1. Is the TPS5430DDAR Compatible With 24-V Industrial Power Systems?Yes, it is fully compatible. The TPS5430DDAR supports a wide input voltage range from 5.5 V to 36 V, making it well-suited for standard 12-V and 24-V distributed power buses while providing a regulated step-down output current up to 3 A.
- 2. What Are Suitable Direct or Alternative Replacements Through LCSC?Higher-current options from the same family, such as the TPS5450DDAR (5-A rating), serve as direct upgrades. For cost-effective pin-compatible alternatives, consider Richtek options like the RT8289GSP or RT8279GSP, depending on your system requirements.
- 3. What Are the Primary Application Scenarios for This Step-Down Converter?The TPS5430DDAR is ideal for consumer electronics like set-top boxes, LCD displays, and DVD players, as well as industrial equipment, automotive audio systems, battery chargers, high-power LED drivers, and general 12-V or 24-V distributed DC power rails.
- 4. What Are the Key Technical Specifications of the TPS5430DDAR?Key specifications include an input range of 5.5 V to 36 V, adjustable output voltage from 1.221 V to 32.04 V, 3-A continuous output current, 500-kHz fixed switching frequency, internal compensation, integrated 110-m惟 MOSFET, and an 8-pin SOIC PowerPAD package.
- 5. How Should Thermal Management Be Implemented During PCB Layout?Since the TPS5430DDAR comes in an SOIC-8-EP PowerPAD package, you must solder the exposed bottom thermal pad directly to a copper ground plane on the PCB with multiple thermal vias to effectively dissipate heat under heavy 3-A continuous load conditions.



