LCSC Electronics logoLCSC Electronics svg logo
登录
USD
TI SN65HVD230DR product image
  • SN65HVD230DR thumbnail 1
  • SN65HVD230DR thumbnail 2
  • 引脚图
  • 封装图
图片仅供参考

TI SN65HVD230DR

制造商
制造商型号
SN65HVD230DR
LCSC 编号
C12084
包装
SOIC-8
客户编号
关键特性
3.3-V CAN TRANSCEIVERS
数据手册TI SN65HVD230DR
RoHS认证现有 2 份文件
替代型号20
现货: 54,985
54,985 现货,极速发货
最小值: 1倍数: 1销售单位: Piece样品: 2
添加到BOM清单
数量单价总金额
1+$ 0.71$ 0.71
10+$ 0.5936$ 5.94
30+$ 0.5116$ 15.35
100+$ 0.4444$ 44.44
500+$ 0.4231$ 211.55
1,000+$ 0.4099$ 409.90
标准封装2500/Full Reel
数量更多价格更优?
$

产品规格

全选
类型描述
类别Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers
制造商TI
包装SOIC-8
Voltage - Supply3V~3.6V
TypeCAN Transceiver
number of channels1
Data Rate1Mbps
Operating Temperature-40℃~+85℃
FeaturesLow-power mode;Wake-up function;Thermal shutdown protection;Bus fault protection;Hot-swap protection;ESD protection
Supply Current17mA
Quiescent Supply Current370uA

概述

AI 翻译

The SN65HVD230, SN65HVD231, and SN65HVD232 controller area network (CAN) transceivers are designed for use with 3.3-V DSPs with CAN controllers, or with equivalent devices. They are intended for use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard. Each CAN transceiver is designed to provide differential transmit capability to the bus and differential receive capability to a CAN controller at speeds up to 1 Mbps. Designed for operation in especially-harsh environments, these devices feature cross-wire protection, loss-of-ground and overvoltage protection, overtemperature protection, as well as wide common-mode range. The transceiver interfaces the single-ended CAN controller with the differential CAN bus found in industrial, building automation, and automotive applications. It operates over a -2-V to 7-V common-mode range on the bus, and it can withstand common-mode transients of ±25 V. On the SN65HVD230 and SN65HVD231, pin 8 provides three different modes of operation: high-speed, slope control, and low-power modes. The high-speed mode of operation is selected by connecting pin 8 to ground, allowing the transmitter output transistors to switch on and off as fast as possible with no limitation on the rise and fall slopes. The rise and fall slopes can be adjusted by connecting a resistor to ground at pin 8, since the slope is proportional to the pin's output current. This slope control is implemented with external resistor values of 10 kΩ, to achieve a 15-V/μs slew rate, to 100 kΩ, to achieve a 2-V/μs slew rate. The circuit of the SN65HVD230 enters a low-current standby mode during which the driver is switched off and the receiver remains active if a high logic level is applied to pin 8. The DSP controller reverses this low-current standby mode when a dominant state (bus differential voltage >900 mV typical) occurs on the bus. The unique difference between the SN65HVD230 and the SN65HVD231 is that both the driver and the receiver are switched off in the SN65HVD231 when a high logic level is applied to pin 8 and remain in this sleep mode until the circuit is reactivated by a low logic level on pin 8. The Vref pin 5 on the SN65HVD230 and SN65HVD231 is available as a VCC/2 voltage reference. The SN65HVD232 is a basic CAN transceiver with no added options; pins 5 and 8 are NC, no connection.

特性

AI 翻译
  • Operates With a 3.3-V Supply
  • Low Power Replacement for the PCA82C250 Footprint
  • Bus/Pin ESD Protection Exceeds 16 kV HBM
  • High Input Impedance Allows for 120 Nodes on a Bus
  • Controlled Driver Output Transition Times for Improved Signal Quality on the SN65HVD230 and SN65HVD231
  • Unpowered Node Does Not Disturb the Bus
  • Compatible With the Requirements of the ISO 11898 Standard
  • Low-Current SN65HVD230 Standby Mode 370 μA Typical
  • Low-Current SN65HVD231 Sleep Mode 40 nA Typical
  • Designed for Signaling Rates up to 1 Megabit/Second (Mbps)
  • Thermal Shutdown Protection
  • Open-Circuit Fail-Safe Design
  • Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications

应用领域

AI 翻译
  • Motor Control
  • Industrial Automation
  • Basestation Control and Status
  • Robotics
  • Automotive UPS Control

替代型号

MPN制造商包装库存单价
LKI65HVD230SLKWICSOP-82,499$ 0.6247
XL65HVD230DRXINLUDASOP-82,380$ 0.2845
SN65HVD230QDRTISOIC-81,754$ 3.2065
SN65HVD232QDRQ1TISOIC-81,031$ 2.388
SN65HVD230MDREPTISOIC-8760$ 7.489
XL65HVD231DRXINLUDASOP-82,150$ 0.2849
SN65HVD231DRTISOIC-8339$ 1.6767
SN65HVD231QDRG4Q1TISOIC-8289$ 2.5807
SN65HVD231QDRQ1TISOIC-842$ 2.5502
SN65HVD231QDRTISOIC-823$ 3.3951
SN65HVD234DRTISOIC-826,289$ 1.7603
SN65HVD235DRTISOIC-819,992$ 1.6291
SIT3051ESASITSOP-82,012$ 0.6223
MAX3051ESATokmasSOP-81,186$ 0.8907
SN65HVD234QDRQ1TISOIC-8904$ 3.2712
TCAN332DRTISOIC-8234$ 1.8914
SN65HVD233QDRQ1TISOIC-853$ 4.0971
SIT65HVD233DRSITSOP-88$ 0.5713
SN65HVD230DRTokmasSOP-82$ 0.4152
SIT65HVD230DRSITSOP-80$ 0.4948

产品常见问题


  • 1. What primary supply voltage levels, signaling rates, and node density limits define the SN65HVD230DR transceiver?
    The Texas Instruments SN65HVD230DR is a high-speed CAN (Controller Area Network) transceiver designed to operate from a single 3.3 V supply, with a recommended operating range of 3.0 V to 3.6 V. It is compatible with the ISO 11898 high-speed CAN physical layer standard and supports signaling rates of up to 1 Mbps. Its high input impedance allows up to 120 nodes to be connected to a single CAN bus.
  • 2. Which package type is available for the SN65HVD230DR?
    The SN65HVD230DR is supplied in an 8-pin SOIC (D) surface-mount package. This package is intended for standard SOIC PCB assembly and is available under the ordering options listed in the Package Option Addendum. For detailed mechanical dimensions and PCB land-pattern recommendations, refer to the corresponding TI package outline drawing.
  • 3. How do the slope control pin and low-power standby mode operate on the SN65HVD230DR?
    The RS (Pin 8) pin supports three operating modes: high-speed mode, slope-control mode, and low-power standby mode. Connecting RS directly to ground enables maximum switching speed. Connecting a 10 kΩ to 100 kΩ resistor to ground adjusts the output slew rate to reduce electromagnetic interference (EMI). Driving RS to a logic-high level places the device into a low-current standby mode, in which the driver is disabled while the receiver remains active. The standby supply current is typically 370 μA.
  • 4. What operating temperature range and protection features does the SN65HVD230DR provide?
    The SN65HVD230DR is specified for operation over an ambient temperature range of −40°C to +85°C. It incorporates thermal shutdown protection, open-circuit fail-safe operation, and HBM ESD protection exceeding ±16 kV on the CAN bus pins. The CAN bus interface supports a recommended common-mode operating range of −2 V to +7 V, while the bus terminals are rated for −4 V to +16 V under absolute maximum conditions and can withstand ±25 V transient pulses as specified in the datasheet.
  • 5. What packaging option is available for the SN65HVD230DR?
    The SN65HVD230DR is available in an 8-pin SOIC (D) surface-mount package. Ordering and packaging options are provided in the product's package addendum. For specific carrier tape dimensions, reel quantities, or shipping configurations, refer to the ordering information associated with the selected orderable part number.